Hi Jc freunde,
Because I have to renew the tap of the shower, I have to remove the wall located on the back of the rear seat.
The four screws are out.
When I try to move the panel, I feel something that maintain it in the red zone.
If I pull with more force, I think it will break...
Any idea how to do ?
Thanks for your help.
how to dismantle wall at the back of the rear seat ?
how to dismantle wall at the back of the rear seat ?
Hi spacy,
I don't have any access above the boiler to this tap.
Has someone already changed the tap of the sink?
Grussen aus Belgien
I don't have any access above the boiler to this tap.
Has someone already changed the tap of the sink?
Grussen aus Belgien
Re: how to dismantle wall at the back of the rear seat ?
they are two masked screws they fit this panel
you feel them with a hook (pict 1); insert the hook between both panels
drill 2 holes (pict 2) + make the corner (in blue) smooth to avoid any sharp angle + do not unscrew fuse box if you do not remove the panel because there is a thin plate on the other side + do not drill the red cross marked hole ( this screw has no effect on the panel )
in my case , polyurethan glue has to be destroyed with a small hook ; I feel this not an original glue ( I'm 2nd owner )
rebuilding (pict 3)
And finally as announced by Spacy, I dn't have any acces to the tap. It is masked by the black shell that protects against water leakage
you feel them with a hook (pict 1); insert the hook between both panels
drill 2 holes (pict 2) + make the corner (in blue) smooth to avoid any sharp angle + do not unscrew fuse box if you do not remove the panel because there is a thin plate on the other side + do not drill the red cross marked hole ( this screw has no effect on the panel )
in my case , polyurethan glue has to be destroyed with a small hook ; I feel this not an original glue ( I'm 2nd owner )
rebuilding (pict 3)
And finally as announced by Spacy, I dn't have any acces to the tap. It is masked by the black shell that protects against water leakage