Problem with alternator?

die zweite Generaton Sprinter (NCV3)
Antworten
Xander_zs
Beiträge: 11
Registriert: 05.01.2018 00:22

Problem with alternator?

Beitrag von Xander_zs » 05.01.2018 00:41

I have a question. When I have the engine running and the alternator is working, the switchboard sets Max 13.2 volts. This is normal? If I put a polymeter in the alternator It sets 14 v. I'm sorry I didn't write German

Benutzeravatar
Jake.Coffee
Beiträge: 116
Registriert: 04.08.2013 11:52
Wohnort: Aurich / Ostfriesland

Re: Problem with alternator?

Beitrag von Jake.Coffee » 05.01.2018 01:30

Hello,

no it isn’t normal it should have more than 14 V.
The problem is the cable from the alternator to the starter and the battery. Thi is worn at the starter.
Basically an doable task to change it by yourself if you’re a bit hands-on.
There is a thread about that topic
viewtopic.php?f=1&t=4801&p=34051#p34051
You‘ll find pictures from the cable in there.

Best Regards
Jake.Coffee - JC NCV3 - 2007 - 318 - Automatik - Nr. 16

Xander_zs
Beiträge: 11
Registriert: 05.01.2018 00:22

Re: Problem with alternator?

Beitrag von Xander_zs » 05.01.2018 17:08

Thanks a lot. It seems obvious that is the problem. When I change it I'll put the results here.

Xander_zs
Beiträge: 11
Registriert: 05.01.2018 00:22

Re: Problem with alternator?

Beitrag von Xander_zs » 20.01.2018 00:31

I've changed the cable. Now I have 14.2 volts. The cable is changed in 30-45 minutes. Thank you so much for the help.

Antworten

Zurück zu „James Cook Generation 3 (2006-2012)“