Fresh water tank drain lever

die ersten Sprinter (T1N)
Antworten
Adrianlle
Beiträge: 323
Registriert: 17.09.2015 11:56

Fresh water tank drain lever

Beitrag von Adrianlle » 13.12.2018 11:18

Greetings from the UK. The red handle that fits on the drain valve for the fresh water tank is getting worn. So it is getting more difficult to open and close the drain valve. Can someone tell me where to get a replacement lever or alternatively a modification to avoid putting the lever on and off the valve? Thanks. Adrian

Benutzeravatar
Thomas T.
Beiträge: 518
Registriert: 06.04.2008 08:43
Wohnort: Wolfenbüttel

Re: Fresh water tank drain lever

Beitrag von Thomas T. » 13.12.2018 14:04

Hi Adrian,

look here:

https://www.campingwagner.de/product_in ... r--TB.html

I think there is a shop in the UK too.

Or do you mean that:

https://www.amazon.de/Stabilo-Sanitaer- ... ugelventil
Was nützt der Tiger im Tank wenn hinter'm Steuer ein Esel sitzt?
Schön'n Gruß, Thomas
JC 312D Automatik, Bj.'96

Adrianlle
Beiträge: 323
Registriert: 17.09.2015 11:56

Re: Fresh water tank drain lever

Beitrag von Adrianlle » 13.12.2018 20:41

Thomas, I mean like the red lever in the amazon link. To fit underneath the Cook on the drain pipe (next to the heater exhaust pipe end) from the cold water tank. Does the Amazon one fit the Cook - is it the right size? Kind Regards Adrian

Benutzeravatar
Thomas T.
Beiträge: 518
Registriert: 06.04.2008 08:43
Wohnort: Wolfenbüttel

Re: Fresh water tank drain lever

Beitrag von Thomas T. » 13.12.2018 21:33

Hi Adrian,

the amazon link should be an example, it's too big, you need one in 3/4 inch.

But if you only need the handle you can go to the next plumbers workshop, i think there you can get one for a tip.
Was nützt der Tiger im Tank wenn hinter'm Steuer ein Esel sitzt?
Schön'n Gruß, Thomas
JC 312D Automatik, Bj.'96

Adrianlle
Beiträge: 323
Registriert: 17.09.2015 11:56

Fresh water tank drain lever

Beitrag von Adrianlle » 14.12.2018 10:37

Thanks Thomas. Is that 3/4 ins bsp? The trouble with a replacement handle is that there seem to be so many different ones. A better system would be to have a drain valve with handle permanently attached I think. Adrian

Benutzeravatar
Thomas T.
Beiträge: 518
Registriert: 06.04.2008 08:43
Wohnort: Wolfenbüttel

Fresh water tank drain lever

Beitrag von Thomas T. » 14.12.2018 11:51

Hi Adrian,

I'm not sure if 3/4 ins bsp is the right designation, in German it is "3/4 Zoll".


The best way for renewing the valve is to disassemble it, take it to a DIY store and look for the right replacement parts.
Was nützt der Tiger im Tank wenn hinter'm Steuer ein Esel sitzt?
Schön'n Gruß, Thomas
JC 312D Automatik, Bj.'96

Adrianlle
Beiträge: 323
Registriert: 17.09.2015 11:56

Re: Fresh water tank drain lever

Beitrag von Adrianlle » 14.12.2018 21:55

Thank you Thomas.

Epeg
Beiträge: 2147
Registriert: 11.07.2009 19:52
Wohnort: Im Wald hinter den Bergen

Re: Fresh water tank drain lever

Beitrag von Epeg » 15.12.2018 17:33

Ich habe den Kugelhahn direkt komplett getauscht.
Griff aus Edelstahl.

https://www.tec-direct24.de/de/Edelstah ... bi_id=1907
Alle sagten: Das geht nicht.
Dann kam einer, der wusste das nicht und hats gemacht 8) [/b]:-)) 316CDI EZ: 03.2006. Sprintshift. 2x 80 WP Solar Modul.

Adrianlle
Beiträge: 323
Registriert: 17.09.2015 11:56

Re: Fresh water tank drain lever

Beitrag von Adrianlle » 16.12.2018 10:22

Thanks Epeg. That is just what I was looking for. I have emailed them to see if they will send to the UK. Adrian

Antworten

Zurück zu „James Cook Generation 2 (1995-2006)“