James Cook Forum

The maintenance flap needs a suction cup and you pull on the, right hand side(worderobe side). The other side is tongue and groove. You pull hard on the right and slide it after. Regarding the cool box, could be anything but you should open the screws of the unit and investigate yourself. Could be j...

Hi guys. I was just wondering, it will be better to use the victron cyrix li for 2x100amp batteries. The alternator in T1N charge around 14.2 to 14.4 which is ideal voltage for the batteries. Also that helps the fact that if you have solars, can charge the house batteries. Am about to have the conve...

1- The shunt, wired this way, is very aquarate, there is not problem with the van 100amp shunt.
2- Actually you could fix the shunt, using double sided tape or on my case, just seat it freely on top of the batteries. The weight and pressure of the cables holds it tight in place.

Hi. It very simple, just connect it as it should, after the instructions and just seat the shunt on top of the batteries. Regarding the 100 amp camper shunt it works anyway, you don't need to think about it. The small round display can be placed anywhere even if you place it behind the panels. You d...

Hi Well, there is the black plastic box that does the movement of the white, flexible rubber that opens/closes the door. Inside the black box there is the mechanism that moves the all think. I can't explain via txt, but if you open the black box and put the mechanism right where it sleeps/where supp...

Hi guys. I really can do with some advice and help. Well the fridge, can start from the main board and it draws 4.5 amps, so it works normal. After about 15 - 20 minutes, stop working and the fridge sign in the main switch start flashing. After turning off the fridge and leaving it off for few hours...

Hi.
From inside looks clean, however be very careful for rust. Rust is the worst enemy of sprinter vans and this sprinter in particular looks like has been painted on the bottom part. Usually a quick job to cover rust.
Good luck

Thank you guys for your replys. Well the fridge actually turns on from the main board and works well for I guess one cycle, but after it turns off automatically since it gets the right temperature, doesn't come on again. The icon start flashing and doesn't work. When the fridge works it draws around...

Hi guys
I have a problem with my fridge. It does start and works for perhaps one full cycle (20 minutes) and after it stops doesn't start/work back again. The fridge icon on the main controller board start flashing and stays like that.
It could be the thermostat? Has anyone had the same problem?

Hello I just wanted to ask for opinions or experiences on charging the lessure batteries. Firstly how many amps does the original setup relay sends to the lessure batteries? Secondly is better to buy a dc to dc charger or is better to use a vsr, taking into account that JC has a old style alternator...

Hi guys I just wanted to know what is the best solution to change the roof vent, skylight in a T1N. I like the heki mini but it looks from what I read researching, that the mini Heki doesn't cover the opening un the roof. So you probably need some kind of extra cover in the roof, which am not keen o...

Just a quick question. Does the internal frame of Heki mini interfere with the bathroom light? Looks like the frame of the original roof light is narrow, the one from Heki looks like is going to go over the light. Any idea from someone here in the forum who actually has used Heki mini? Any pics?