James Cook Forum

Thanks for helping. I have now done some measurements on pin 19 to 24 (pin 21-24 goes to the D3L) Pin 21 controls fine the D3L by +12V to start and 0V for stop Pin 22 jumps between 5,1V and 5,6V. I do not know why or if it is ok. Pin 23 and 24 consequent shifts between minus and plus in differense o...

Hi I have done some renovation of the D3L heater with new glow plug, filter and cable spades. I have now a problem with the temperature regulation, because it keeps high heating and blowing after reaching the set temperature. Everything else is working fine and no error. The inside room temperature ...

Thanks for a lot of inspiration and I manged to build a fan with temperature control and changeable speed. It needs more work to look good, but it works I also miss a switch to change direction of the fan.

Hi all, Thanks for all the good advice! I will not take in the air from below due to the exhausting risk. I do not want to take the risk. For the extra air intake, I will try to get both the front door metal mesh and outside wind screens. In combination with the mid vents open, I hope it will be eno...

Hi, I have a JC T1N from 2002 Is it possible to connect a secondary controller to the heating fan, so it is possible to regulate only the fan without heating? It must still be possible to use the original Westfalia heating control. I expect that the air is cooler below the camper than an intake from...