banquette arrière

die ersten Sprinter (T1N)
Antworten
remia
Beiträge: 3
Registriert: 19.09.2017 03:11

banquette arrière

Beitrag von remia » 11.01.2020 18:46

Bonjour,
J'ai un james cook 2004 dont la banquette arrière est difficile a glisser le long de ses rails. J'ai . ebau y mettre de l'huile dans les rails , ça reste toujours difficile. Je pensais y faire installer un moteur électrique pour tirer et fermer la banquette. Est-ce quelqu'un a déjà eu ce problème et que penses-tu de ma solution?
Merci à l 'avance

Benutzeravatar
Carlo
Beiträge: 470
Registriert: 10.11.2005 16:44
Wohnort: Aachen

Re: banquette arrière

Beitrag von Carlo » 12.01.2020 11:21

Bonjour!
Les rails du banquette arrière doivent être nettoyés régulièrement et traités avec de l'huile de silicone.
Je pense qu'un entraînement électrique est très difficile à mettre en œuvre.
Salutations et bon dimanche
Carlo

Adrianlle
Beiträge: 323
Registriert: 17.09.2015 11:56

Re: banquette arrière

Beitrag von Adrianlle » 14.01.2020 11:11

I too have always had difficulty with the back seat. I removed the seat from the van and adjusted the feet for the guides. It was better for a while but then got difficult again. Now when I spray silicone in the guides it will slide v easily But a few hours later it is heavy to slide again. What I now do is carry a spray can of silicone and spray the guides at night before sliding out the bed and then spray again in the morning before sliding it back again. A poor solution but works pending a better solution! Adrian

Benutzeravatar
freigeist
Beiträge: 467
Registriert: 28.09.2012 21:52
Wohnort: Wernigerode

Re: banquette arrière

Beitrag von freigeist » 14.01.2020 11:25

Hallo !

Ich nehme immer folgendes Produkt: https://www.amazon.de/W%C3%BCrth-Trocke ... B076CLMX35

Hält etwas länger als das Siliconspray , aber leider auch keine Dauerlösung :roll:

Grüße
James Cook,Baujahr 1998
314 Benziner

Adrianlle
Beiträge: 323
Registriert: 17.09.2015 11:56

Re: banquette arrière

Beitrag von Adrianlle » 15.01.2020 17:20

Freigiest, thanks for the link. I’ll order a can of this PTFE based spray to see if it lasts longer than the silicone spray.

Antworten

Zurück zu „James Cook Generation 2 (1995-2006)“