Panel removal above back door

die zweite Generaton Sprinter (NCV3)
Antworten
lunatic
Beiträge: 127
Registriert: 02.03.2023 12:33

Panel removal above back door

Beitrag von lunatic » 07.07.2024 14:22

I am replacing the existing reversing camera with a small new one just above the high brake light.

I want to remove the plastic panel with the light in it above the back door. Once I have that off I can easily feed the camera cables.

See images. I have removed the 2 screws marked with arrows, but not sure what to do next. I have tried pulling, but the panel is still on solidly.

If anyone can help with advice, I would really appreciate it.

Thanks,

Ian
Dateianhänge
Back moulding above back doors.jpg
Back moulding above back doors.jpg (109.77 KiB) 1080 mal betrachtet
4.jpg
4.jpg (152.82 KiB) 1080 mal betrachtet

Benutzeravatar
netsailor
Beiträge: 618
Registriert: 09.10.2009 19:48
Wohnort: Berlin

Re: Panel removal above back door

Beitrag von netsailor » 07.07.2024 15:39

remove the lamp as well (there might be some more screws hidden there, but I'm not sure), then pull it off! As far as I remember, there are no special tricks involved.
James Cook Classic 318CDI 3,5t Automatik EZ 4.08; Eigenausbau 207D EZ1977 bis 2001
Bild

lunatic
Beiträge: 127
Registriert: 02.03.2023 12:33

Re: Panel removal above back door

Beitrag von lunatic » 07.07.2024 18:01

OK, thanks. I will try that.

Antworten

Zurück zu „James Cook Generation 3 (2006-2012)“