Vertical light near the door of the bathroom

die zweite Generaton Sprinter (NCV3)
Antworten
Benutzeravatar
MBDUM
Beiträge: 19
Registriert: 24.04.2012 08:25

Vertical light near the door of the bathroom

Beitrag von MBDUM » 02.06.2019 15:25

Hi all,

Does anyone know how to remove the light cover (see pic) to get at the lightbulb? I want to replace it with LEDS, but I think the previous owner broke something and stuck it on so I need to understand how it should be attached before I cut through the silicone that he used.

Thank you,
Sam
Dateianhänge
IMG_2427.jpg
IMG_2427.jpg (246.07 KiB) 1562 mal betrachtet

Benutzeravatar
MBDUM
Beiträge: 19
Registriert: 24.04.2012 08:25

Re: Vertical light near the door of the bathroom

Beitrag von MBDUM » 07.06.2019 15:24

Thank you Spacy.

I think my problem is that the previous owner broke the plastic fixing up the top (behind the gray panel) and then glued the whole lamp cover onto the door frame with clear silicon sealant. He also glued in the white decorative strips which I have already carefully pulled out.

Anyway, I will have a go at separating it with a knife. I wonder if I would be able to buy replacement parts if I make things worse?

But thank you for your reply as always.

Sam

Benutzeravatar
Mattes
Beiträge: 37
Registriert: 10.11.2018 22:52
Wohnort: Freiburg

Re: Vertical light near the door of the bathroom

Beitrag von Mattes » 16.06.2019 19:47

Hey Sam,

Trust you already solve that issue, if you unfortunately need to order some parts:

https://nemigaparts.com/de/cat_spares/e ... 06633/62x/

I faced similar problems and ordered via my local MB dealer some parts.

Follow the chapter 98.Wohnmobil/westfalia/100 Verkleidung Dusche/#170

should be your component.

Cheers
Mat
NCV3 318 CDI Automatik Bj. 2007,
.... Ich? Ich habe keine besondere Begabung, sondern bin nur leidenschaftlich neugierig......

Antworten

Zurück zu „James Cook Generation 3 (2006-2012)“