Panel removal under dining window

die zweite Generaton Sprinter (NCV3)
Antworten
lunatic
Beiträge: 124
Registriert: 02.03.2023 12:33

Panel removal under dining window

Beitrag von lunatic » 14.10.2024 11:19

I need to remove the panel below the dining window (see image). The whole panel below the red line with the 2 red arrows. I know how to remove the upper panel above red line but not the lower one.

Has anyone done this, and if so what is the best way to approach the job?

Thank you!
Dateianhänge
Lower panel removal.jpg
Lower panel removal.jpg (174.09 KiB) 91 mal betrachtet

Berrylol
Beiträge: 7
Registriert: 03.09.2024 15:18

Re: Panel removal under dining window

Beitrag von Berrylol » 14.10.2024 14:01

Hey! Would you tell me how to remove the upper part? In kind, I would tell you how I manage the lower one.
I believe you cannot remove the lower without removing the upper. Since I have to take it all out, I will be able to confirm this hypothesis.

Best regards, Berry


Gesendet von iPhone mit Tapatalk
Zuletzt geändert von Berrylol am 15.10.2024 18:39, insgesamt 1-mal geändert.
NCV3 2007 315 mit Oberaigner Werksumbau 4x4, 3 Sperren, Untersetzung

lunatic
Beiträge: 124
Registriert: 02.03.2023 12:33

Re: Panel removal under dining window

Beitrag von lunatic » 14.10.2024 14:59

Hi Berry,

Re top section.

1. Remove the strip where my red line is. A few screws.
2. Remove light fittings and electrical socket from top of upper panel.
3. Feel behind upper panel for where the green plastic clips are attached. From memory, 1 or 2 at bottom and same at top.
4. Rest of panel is attached with velcro.
5. Carefully remove wires from back of small speaker
6. Pull panel very carefully off the plastic legs and velcro.

That should be it. Image attached is what the upper looks like without the panel and also blinds removed for fixing.

I look forward to hearing back as to how you remove the bottom panel.

Regards, Ian
Dateianhänge
Dining Window panels and screens removed_edited_edited.jpg
Dining Window panels and screens removed_edited_edited.jpg (246.57 KiB) 72 mal betrachtet

Berrylol
Beiträge: 7
Registriert: 03.09.2024 15:18

Re: Panel removal under dining window

Beitrag von Berrylol » 15.10.2024 21:46

Hey Ian,

I started taking out the panels today! As I suspected it‘s not possible to take out the lower panel without removing the upper first - at least without breaking anything.

As you can see from the images attached there are two spots circled in red you would not be able to reach.

It’s a right pain to get the lower panel out even beyond having to remove the upper one. I‘ll take some pictures in the light when I get the chance.

Best regards
Berry

Bild


Gesendet von iPhone mit Tapatalk
NCV3 2007 315 mit Oberaigner Werksumbau 4x4, 3 Sperren, Untersetzung

Antworten

Zurück zu „James Cook Generation 3 (2006-2012)“