TV Bracket installation options?

die zweite Generaton Sprinter (NCV3)
Antworten
fleep
Beiträge: 102
Registriert: 17.08.2017 16:15

TV Bracket installation options?

Beitrag von fleep » 16.04.2019 21:43

Hi,

Has anyone retrofitted a TV bracket to the NCV3 JC? I think that the original one is no longer available, however I would like to add a similar one to the factory installed bracket for a screen. I assume that there must be a supporting structure behind the back wall to fix a bracket to, as screwing into the plastic is not very strong at all. Does anyone have photos of the bracket and how it attaches to the library wall?

Thanks!

:)

Benutzeravatar
MBDUM
Beiträge: 19
Registriert: 24.04.2012 08:25

Re: TV Bracket installation options?

Beitrag von MBDUM » 12.06.2019 08:00

Hi Fleep,

I can send you a pic of mine. Basically it is an aluminium extruded pole with slots in it, to which you clamp a swinging arm with a VESA plate.

The pole is about 3 feet tall, with sturdy attachment at either end at the wall above the fridge. The pole is handy for something to hang onto as you clamber up into the bunks. You might be bale to inspect what's behind the plastic facia through the ventilation slots (maybe).

Sam

TomTom008
Beiträge: 20
Registriert: 15.03.2018 08:04
Wohnort: International

Re: TV Bracket installation options?

Beitrag von TomTom008 » 12.06.2019 19:32

8740D52C-CFD6-4679-A51A-BFD6905D0694.jpeg
8740D52C-CFD6-4679-A51A-BFD6905D0694.jpeg (2.2 MiB) 2022 mal betrachtet

fleep
Beiträge: 102
Registriert: 17.08.2017 16:15

Re: TV Bracket installation options?

Beitrag von fleep » 15.06.2019 19:11

Aha, is the TV bracket the metal plate with the two bolts coming out of it? Also how much work is there to get to this panel? It's looks like yours just swung out but that's probably easier said than done.

Thanks for the picture 👍

TomTom008
Beiträge: 20
Registriert: 15.03.2018 08:04
Wohnort: International

Re: TV Bracket installation options?

Beitrag von TomTom008 » 15.06.2019 20:51

You have a PN

TomTom008
Beiträge: 20
Registriert: 15.03.2018 08:04
Wohnort: International

Re: TV Bracket installation options?

Beitrag von TomTom008 » 16.06.2019 10:11

Here another picture to see the fixing points, one of the green is not shown.
You can also see the upper bracket of the TV holder.
BR
Tom
Dateianhänge
B2731F93-864A-47ED-92B0-D28A82C86BE7.jpeg
B2731F93-864A-47ED-92B0-D28A82C86BE7.jpeg (323.41 KiB) 1949 mal betrachtet

fleep
Beiträge: 102
Registriert: 17.08.2017 16:15

Re: TV Bracket installation options?

Beitrag von fleep » 02.08.2019 00:03

I have been busy with this upgrade. When I removed the library wall, it seems that the plastic fur the wall is not so strong, and I am worried that this will crack in time with the weight of an arm and screen. So, looking at the options, it seems that the wooden frame is very sturdy, and is held in place with metal brackets. This seems a better option to me than attaching to the plastic.

So, I found a company to make me a custom TV bracket for the JC from solid aluminium. The brackets are 12mm thick, and mount to the wood. The outer brackets hold a pole 800mm high.

Here is the work so far...
Dateianhänge
IMG_20190801_231712.jpg
IMG_20190801_231712.jpg (2.9 MiB) 1824 mal betrachtet
IMG_20190801_231710.jpg
IMG_20190801_231710.jpg (4.78 MiB) 1824 mal betrachtet
IMG_20190801_230541.jpg
IMG_20190801_230541.jpg (2.9 MiB) 1824 mal betrachtet
IMG_20190801_230536.jpg
IMG_20190801_230536.jpg (2.8 MiB) 1824 mal betrachtet
IMG_20190801_230736.jpg
IMG_20190801_230736.jpg (2.73 MiB) 1824 mal betrachtet
IMG_20190801_230731.jpg
IMG_20190801_230731.jpg (3.26 MiB) 1824 mal betrachtet
IMG_20190801_222856.jpg
IMG_20190801_222856.jpg (2.97 MiB) 1824 mal betrachtet
IMG_20190801_222851.jpg
IMG_20190801_222851.jpg (2.85 MiB) 1824 mal betrachtet

fleep
Beiträge: 102
Registriert: 17.08.2017 16:15

Re: TV Bracket installation options?

Beitrag von fleep » 02.08.2019 21:21

And, it is done. What a massive job for something seemingly easy. The bracket is now so strong that it will hold a 60 inch TV!

Next job, reverse camera! That should be a 5 minute job after this one :shock:
Dateianhänge
15647772444433575630780650102332.jpg
15647772444433575630780650102332.jpg (1.85 MiB) 1806 mal betrachtet

Vtxbe
Beiträge: 259
Registriert: 18.09.2016 07:49
Wohnort: Belgium

Re: TV Bracket installation options?

Beitrag von Vtxbe » 04.08.2019 20:44

Hi fleep, hi tomtom008

How do you remove the plastic wall ?

Do you any pictures or information where are the screws or clips or ...?


txs.

Vincent.

fleep
Beiträge: 102
Registriert: 17.08.2017 16:15

Re: TV Bracket installation options?

Beitrag von fleep » 04.08.2019 22:54

Hi,

Yes, you have to remove two of the large plastic panels. One by the main lounge window, which requires only to remove the table rail using Allen bolt keys. The rest is held on with crazy strong velcro and pop clips. This means pulling and feeling where the fastenings are located, but it does come off with a lot of swearing and pulling.

The library wall is a lot harder to figure out, but there are four pop clips on the wall that comes off the side of the van, plus a couple more on the side with the bathroom door light. Then screws are hidden behind one of the aluminium pieces above the fridge. You need to remove that first, then you see the screws.

If you want photos of the panels they are still off the van as I am running a number of extra cables and installing power supplies, so I can show you where all the hidden clips are located. The Mercedes WIS guide does describe the process but it is not so detailed.

Are you planning to do the same installation?

Vtxbe
Beiträge: 259
Registriert: 18.09.2016 07:49
Wohnort: Belgium

Re: TV Bracket installation options?

Beitrag von Vtxbe » 06.08.2019 21:03

Hi Fleep,

One day I'll change my screen but the most urgent is to change the tap of the bathroom.

I'll be happy with some pictures (by email vtx(at)skynet.be); wich aluminum parts above the fridge do you mean?

Antworten

Zurück zu „James Cook Generation 3 (2006-2012)“