Outside 230 V not showing on the LCD

die ersten Sprinter (T1N)
Antworten
Legris
Beiträge: 2
Registriert: 11.08.2018 08:57

Outside 230 V not showing on the LCD

Beitrag von Legris » 11.08.2018 09:03

Hello. From the last night my James Cook 2.9 Diesel 1996 not showing outside plugged 230 V. Lcd not showing plugged 230 V. Fridge and saloon lamps not working, but 230 V socket works fine and I can charge the phone and more like this.
Maybe someone have the same problem? Thanx

Benutzeravatar
Wedge
Beiträge: 70
Registriert: 03.10.2014 16:31
Wohnort: Rhein-Main Region

Re: Outside 230 V not showing on the LCD

Beitrag von Wedge » 11.08.2018 18:44

Hi Legris,
please check the fuses, hidden behind the second seatrow/bench.
Pull the bench into the front, fuses are hidden below the head cushion under covered with transparent cover.
There is the earth leakage circuit breaker (hopefully it is the right translation of Fehlerstrom-Schutzschalter (FI Schalter)).
If it's released you can pull it back to close the circuit.
In addition you have to check why it was released!

Second check:
When bench is pulled in front in the drivers side is a grey plate with four screws.
Remove the plate batterie charger is now visible.
Maybe some wire went loose?
No fuses there when I remember correctly.


Hopefully this will help you.

Best Regards,
Wedge





----------------------------------------------------------------

James Cook 312D 1998

Antworten

Zurück zu „James Cook Generation 2 (1995-2006)“