Control panel replacement

die zweite Generaton Sprinter (NCV3)
Antworten
lunatic
Beiträge: 127
Registriert: 02.03.2023 12:33

Control panel replacement

Beitrag von lunatic » 11.03.2023 13:35

2 parts I am thinking of taking as spares back to Canada. Does anyone know where to buy them and how much they cost in Europe?

1. new overhead control panel

2. Water pump

Anything else I should take back? I have a spare roof glass, which is good.

Thank you,

Ian

Benutzeravatar
netsailor
Beiträge: 618
Registriert: 09.10.2009 19:48
Wohnort: Berlin

Re: Control panel replacement

Beitrag von netsailor » 11.03.2023 15:01

No. 2 is easy and you might want to take 2:
https://www.ebay.de/itm/382437434113
James Cook Classic 318CDI 3,5t Automatik EZ 4.08; Eigenausbau 207D EZ1977 bis 2001
Bild

lunatic
Beiträge: 127
Registriert: 02.03.2023 12:33

Re: Control panel replacement

Beitrag von lunatic » 12.03.2023 21:47

Thank you! I have found the water pump on Amazon.

Is this the same as the original in a 2007 James Cook? Do they tend to fail often?

Ian

Benutzeravatar
netsailor
Beiträge: 618
Registriert: 09.10.2009 19:48
Wohnort: Berlin

Re: Control panel replacement

Beitrag von netsailor » 12.03.2023 22:04

lunatic hat geschrieben:
12.03.2023 21:47

Is this the same as the original in a 2007 James Cook? Do they tend to fail often?

Ian
I think it is the same as in the previous Cook series. They usually last several years, but tend to fail without any previous notice. I think I changed it twice since 2009.
James Cook Classic 318CDI 3,5t Automatik EZ 4.08; Eigenausbau 207D EZ1977 bis 2001
Bild

lunatic
Beiträge: 127
Registriert: 02.03.2023 12:33

Re: Control panel replacement

Beitrag von lunatic » 12.03.2023 22:15

OK, I know how to get one now. Thanks.

Benutzeravatar
netsailor
Beiträge: 618
Registriert: 09.10.2009 19:48
Wohnort: Berlin

Re: Control panel replacement

Beitrag von netsailor » 12.03.2023 22:26

It is advisable to carry one spare to be able to change it anytime/anywhere. It is.inexpensive, small and otherwise it would be camping w/o running water for some days, depending on where.you are.
James Cook Classic 318CDI 3,5t Automatik EZ 4.08; Eigenausbau 207D EZ1977 bis 2001
Bild

lunatic
Beiträge: 127
Registriert: 02.03.2023 12:33

Re: Control panel replacement

Beitrag von lunatic » 12.03.2023 23:01

So does anyone have any idea where I could buy a spare control panel to take back to Canada with me?

It sure would be good to have a spare.

Thank you.

rainerd
Beiträge: 444
Registriert: 28.12.2018 18:57

Re: Control panel replacement

Beitrag von rainerd » 13.03.2023 09:42

I guess Mercedes is the only source for a panel.

Benutzeravatar
netsailor
Beiträge: 618
Registriert: 09.10.2009 19:48
Wohnort: Berlin

Re: Control panel replacement

Beitrag von netsailor » 13.03.2023 09:52

Didn't our @admin Peter get a replacement a few years ago?
I would ask here
https://www.ermel-freizeitmobile.de/
in case of any major problems with Westfalia parts.
James Cook Classic 318CDI 3,5t Automatik EZ 4.08; Eigenausbau 207D EZ1977 bis 2001
Bild

lunatic
Beiträge: 127
Registriert: 02.03.2023 12:33

Re: Control panel replacement

Beitrag von lunatic » 13.03.2023 10:49

I have just emailed him. Thank you.

Ian

Vtxbe
Beiträge: 271
Registriert: 18.09.2016 07:49
Wohnort: Belgium

Re: Control panel replacement

Beitrag von Vtxbe » 14.03.2023 06:25

the control panel looks the same on some recent Mercedes Marco Polo and VW California.

I don't know if the control unit is the same; it could be yes with different parameters ( mains differences are the possibilities of gaz level sensor, open roof, airtronic or hydronic , bathroom temperatur sensor or no ).

The control unit is located near the charger.


note ; without control pannel , you can NOT test heater, fridge, (charger). water level sensors .

fleep
Beiträge: 108
Registriert: 17.08.2017 16:15

Re: Control panel replacement

Beitrag von fleep » 14.04.2023 13:58

In the past I have contacted Westfalia and they have tried to help. There is a guy there who seems to be English (Gareth) gareth.white@westfalia-mobil.de

Not sure if he is still there but worth a go.

Antworten

Zurück zu „James Cook Generation 3 (2006-2012)“